Acoustic hood

The acoustic hood reduces the sound emission of the regeneration impulse.


Active carbon filter

The active carbon filter is a filter element eliminating gases and odours. Activated carbon filters can optionally be used in our dedusting systems.

Areas of application

Wherever bulk materials are processed, filter systems from ts-systemfilter are in use. For example, in the following bulk material processes: discharge, filling, dosing, emptying, filtering, (pneumatic) conveying, lifting, storage, grinding / crushing, measuring / weighing, mixing, sieving, separating. You miss your application? Contact us. We will find the right solution for your bulk material problem. You can find out more about the areas of application of our filter systems in the corresponding section of our website.



ATEX is a synonym of the abbreviated name of the European Directive 2014/34/EU to approximate the laws of the Member States concerning equipment and protective systems intended for use in potentially explosive atmospheres. Our filter devices are approved to dust-ex zone 20 and gas-ex zone 0.


Base filter apparatus

The base filter apparatus is the minimum equipment for the separation of bulk material and gas. It can be integrated into existing systems (see product sheet).


Bottom claw

The bottom claw is used for fixing a stand filter apparatus. In our product range you will find further assembly components such as welding frame or wall holder.


Bulk material

The bulk material defines the conveying product.


Bursting Device

The bursting device serves to relieve improper pressure. In our filter range you will find additional safety components for your filter systems.


Butterfly valve

The butterfly valve is a shut-off device to control the flow rate in a tubing.



Clamping ring system

The clamping system connects the tubular parts. The housing components of the filter apparatuses are connected to a clamping ring system.


Clean air side

The clean air side defines the exhaust air side past a filtration  level.


Conic filter

The conic filter apparatus is especially well suited for the dedusting of closed containers and for the filtration of bulk material with a low rate of descent. There are also many other types in the modular system of ts-systemfilter gmbh available.


Cyclone filter apparatus

The cyclone filter apparatus is used for the separation of bulk materials of low bulk density.



Dedusting is the filtration of particles from the outgoing air at a working place or the environment.


Dedusting devices

Dedusting devices are filter units separating the bulk material from the carrier gas.


Differential pressure control

The differential pressure control is used to control the regeneration of the filter elements by compressed air impulses. The cleaning starts or stops automatically.

Dirty air side

Defines the dirty air side before a filtration level.


Dust container with lifting spindle

The dust container with lifting spindle is used to where the separated product should be collected or disposed.


Exhaust air

The exhaust air defines the clean air side past a filtration level.




The fan is connected to the clean gas side of a filter unit and is designed for the delivery of gaseous media. Upon request, we can supply you with filtering devices with suitable fans.



FDA is the abbreviation of Food and Drug Administration. FDA steht für Food and Drug Administration. Our filter units are optionally designed for the food industry. Special requirements with regard to surfaces or captive components are of course taken into account.


Filter apparatus

The filter apparatus is a dedusting device. It separates the bulk material by compressed air impulses from the carrier gas. Using the the modular system the filter units can be assembled according to customers´specification and adapted to different tasks.


Filter cartridge

Cartridge filters serve as a filter surface in the dedusting system to separate gas and dust. The filter area of the ts-systemfilter star filters can be individually configured by varying the number of pleats or the length of the filter elements. Different filter media are available (e.g. cleanable and dissipative HEPA filter media of filter class H13). With ts-systemfilter, the filter surface of the filter elements can be disposed of separately by means of a separate support body, so that the support tube can be reused - a significant contribution to the issue of sustainability.


Filter elements

Filter elements are filter inserts in a filter apparatus to separate solid substances from gaseus substances. You can use, e.g. star filter, filter bags, multifunction star filter, metal filter or activated carbon filter with different filter media.


Filter medium tester

This experiment describes the most important property of the filter medium, namely the behaviour under operating conditions. Mainly this experiment decides on the application possibilities of a filter medium. In this test, the test specimen is dusted evenly with a dusting device (solid particle generator) from an upstream side specified by the manufacturer. The differential pressure between inflow chamber (raw gas side) and after the filter (clean gas side) is measured. This differential pressure increases with increasing clogging of the filter medium. When a dedusting point previously set on the control (pmax) is reached, the test specimen is cleaned from the clean gas side by an abrupt pressure increase (2 bar). Now, the differential pressure falls back to a value slightly above the initial differential pressure, since the filter medium has not been completely cleaned. This process is repeated until the dust-filled cylinder of the dusting device is emptied, or after a dedusting process, a certain differential pressure (pmin) is no longer undershot. If the latter is the case, there would be many short successive dedustings due the very rapidly increasing differential pressure. However, this is detected by the controller and the dedustings then follow one another with a pause time set on the controller. The tests (differential pressure curves) are recorded by a data logger and a recorder connected to the controller.

Filter module

The filter module is a filter apparatus. It is integrated autarkically into the process or it is used as a police filter in the bypass mode on the exhausted air side to control the process. The filter modul can be used in the food industry. Optionally, you receive glass fiber-free H13 filter media.


Filter plate

The filter plate is a device separating the dirty air side from the clean air side.



Filtration of the outgoing air at a working place or the environment. For this purpose, ts-systemfilter offers various types of dedusting systems in a modular system.


Flameproof construction

Filter unit  with a maximum permissible pressure resistance.

Friction coefficient

The friction coefficient is u.a. a measure of the adhesion of bulk materials to a filter medium. The measurement of the friction coefficient is used to select the appropriate filter medium for the filter element in the filter apparatus.



HEPA stands for High Efficiency Particulate Air Filter and describes the classification into filter classes. In addition to the HEPA particulate filter class, a distinction is also made between EPA (Efficiency Particulate Air filter) and ULPA (Ultra Low Penetration Air filter).

At ts-systemfilter a.o. glass fiber-free H13 / H14 filter media are available. Thanks to the highly efficient, cleanable particle filters produced from it, degrees of separation of ≥ 99.995% or clean gas values ​​of < 1 mg/m³ can be achieved with just one filter stage.

Here you can find out more about the subject of particulate filters and filter classes.


Hose filter

The hose filter is a filter hose for dedusting. The filter medium is formed to a tube and equipped with a flexible support spring.


Housing seal

The housing seal permits fixing two modular systems of the same model series.together wih a centering ring.



Implosion protection

The implosion protection is used stopping unnecessary air change and preventing an implosion at product discharge as well as the inlet of air dampness



Level sensor

The level sensor is a signal alarm device signal for monitoring a silo. Optionally, we also provide you with further accessories for our filter devices.


Mechanical regeneration

The mechanical regeneration cleans the filter medium by shaking.


Mixer filter apparatus

The mixer filter apparatus is used to be installed on a building-material mixer. By a time-mode regeneration with compressed air the entire deposited material automatically is put back into the mixer. There is a wide variety of filter media available for the filter cartridges.

Mobile extraction filter unit

Rollers make individually configurable filter systems mobile. In addition, mobile filters can be equipped with extraction arms in hose or tube design in various lengths. Take a look at more individual application examples and industry solutions.

Modular system

The modular system allows different series and thus different sizes to be combined with each other.



Pinch valve

The pinch valve is a shut-off device to control the flow rate in a tubing. For our filter apparatuses, further accessories are available.


Police filter

The police filter is a safety filter. It is used to prevent dust emissions when the filter elements are damaged.


Pressure compensation valve (DAV)

The pressure compensation valve (DAV) is an overpressure and underpressure protection device. It prevents the silo from overcharge and bursting.


Pressure display module

The pressure display module DAM-2 is a digital display module indicating the pressure difference in mmWS. It can be installed in the filter head or in the control room.


Pressure relief downstream

In case of a dust explosion the pressure relief system reduces the explosive pressure. An extension of the filter housing above the pressure relief system makes it possible to divert the compression wave to the outside, so that the hazardous area still can be used.

Pressure shock resistant construction

Filter unit  with a maximum permissible pressure resistance.


Protective grill

The protective grill prevents a dropping out of the filter elements inside a filter apparatus.



Sack feeding

The top mounted filter apparatus for sack feeding is preferred where a product is to be supplied to a process manually at the same time preventing or minimizing the formation of dust.



Separation of the bulk material from the carrier gas. For this process, ts-systemfilter offers various filter devices and different filter cartridges.


A cyclone can be used as separator. The bulk solid particle is separated with a high velocity by means of centrifugal force. The air leaves through the top containing a respectively high part of residual dust (see also our technical essay "Dedusting of air by filter separation").


Safety filter

The safety filter is a police filter. It is used to prevent dust emissions when the filter elements are damaged.


Shaker filter

The shaker filter cleans the filter elements by shaking. Alternatively, other cleaning options are available in our modular system (for example pressure difference or time control).

Shut-off device

The valve is used as a shut-off device to control the flow rate in a tubing.


Slide rule

With a slide rule all essential values for the selection of a filter apparatus in the area of the air- and gas filtration can be read.

Small stand filter

The small stand filter apparatus is especially suitable for the suction cleaning of working places and machines to where the separated product should not be returned immediately.


Stand filter apparatus

The stand filter apparatus is suitable for the suction cleaning of working places and machines to where the separated product should not be returned immediately. It is available with a sack for the bulk material, a dust pot or dust container.

Star filter

The star filter is a tubular pleated filter element separating the bulk material from the carrier gas.



Test equipment for filter media

In our laboratory we can test the important properties of filter media, such as bursting pressure, air permeability, pore size, tensile strength / elongation, flexural strength, thickness, conductivity, surface / surface resistance and coefficient of friction.

Testing equipment for bulk materials

In our laboratory we can determine the most important properties of your bulk materials in a bulk material analysis (for example, bulk density, grain density). On our filter media test stand, which is equipped with a brush dispenser and a scattered light spectrometer, we test your bulk material under real conditions and thus determine the appropriate filter medium for your filter apparatus. You benefit from our extensive bulk material database.



Top mounted filter

The top mounted filter is a dedusting device. It is attached to a container and connected with a divided loose flange. (see product sheet).


Two-way filter

The two-way filter is a filter apparatus separating the bulk material from the carrier gas. It is integrated autarkically into the process or it is used as a police filter in the bypass mode on the exhausted air side.



Weather cowl

The weather cowl is equipped for outside installation. It protects the filter apparatus from effects of the weather.


Workplace dedusting

The small stand filter apparatus is especially suitable for the suction cleaning of working places and machines to where the separated product should not be returned immediately.